Adaptec 1430SA 4 Port Serial ATA RAID Controller - - Up to 300MBps per Port - 4 x 7-pin Serial ATA/300 - Serial ATA Internal

MODEL- 2240900-R          VENDOR- ADAPTEC INC
    
FEATURES- RAID 1430SA RoHS Kit
       PCI Express x4, 4-port SATA 3Gb/s supporting RAID 0, 1, 10.
       4 Serial ATA 3Gb/s ports, PCIe x4, low-profile form factor with 
        Native Command Queuing, RAID 0, 1, and 10 for desktops, 
        workstations and entry-level servers.
       Serial ATA 3Gb/s, the successor technology to SATA for data storage, 
        is a point-to-point connection that delivers full throughput to 
        each storage device by allowing multiple ports to be managed by a 
        single controller.
       The Adaptec RAID 1430SA card is a four-port controller featuring 
        Adaptec HostRAID - an integrated RAID technology that maximizes 
        system performance and uptime. The Adaptec 1430SA supports up to 
        four 3Gb/s Serial ATA drives, Native Command Queuing, and offers 
        RAID levels 0, 1, 10, and JBOD (individual drive). The Adaptec 
        48-bit logical block addressing (LBA) support enables use of disk 
        drives exceeding 137 GB in capacity. The Adaptec 1430SA supports 
        Windows 2000, Windows Server 2003, Windows XP, RedHat Linux, SuSE 
        Linux, and NetWare.
    Includes Adaptec 1430SA controller with full-size bracket, Four 1-meter 
      Serial ATA cables, Low-profile replacement bracket, Quick Install 
      Guide; Bootable Installation CD containing (Operating system drivers,
      Complete user documentation); Adaptec Storage Manager CD containing
      (Adaptec Storage Manager GUI software, Complete user documentation).
* Low-cost Serial ATA 3Gb/s RAID card with HostRAID RAID 0, 1 and 10 for 
  data protection and increased performance.
* Ideal for desktop and workstations as well as entry-level servers 
  requiring low cost SATA RAID 0, 1, and 10.
* Small office and home office as a boot device for print, file, and 
  storage servers. 
* Key Differentiators 
   - RAID 0, 1, and JBOD 
   - Native Command Queuing (NCQ) 
   - SATA tape support 
   - PCI Express x1 
   - Supports bootable arrays 
   - 48-bit LBA supports large capacity drives 
   - Low-profile form factor 
   - RoHS compliant
  
  -- SPECIFICATIONs ------------------------------------
INTERFACE/BUS- PCI Express 4-lane 2.5 Gb/s
CONNECTORS   - 4 internal stacked SATA connectors
TRANSFER RATE- Up to 3 Gb/s
# OF DEVICES - Up to 4 SATA II 3Gb/s or SATA I 1.5 Gb/s disk drives
O/S SUPPORT  - Windows 2000
               Windows XP
               Windows Server 2003
               Novell NetWare 6.5
               SUSE Linux
               Red Hat Linux
REQUIREMENTS - Intel or AMD architecture with available PCI Express x4 slot
DIMENSIONS   - 2.5" H x 4.7" L
  www.adaptec.com